Kinto KAKOMI IH enamel pot 1L

Pot: 

• High heat-resistant ceramic

Lid, Steam plate: 

• Ceramic
• 100V and 200V induction heater, direct fire, halogen heater, ceramic hob, microwave, and oven safe

Wash with care. Do not use abrasive cleansers or steel wool. Immediately wash and dry well after use, and keep dry when not in use. If the pot becomes burnt, boil water in the pot, add 1 tablespoon of baking soda and simmer in low heat for 2-3 minutes, let it cool down and rub with a melamine sponge.

Adjust heat to medium or lower when using on 200V induction heater. The time it takes to boil may vary depending on the type of induction heater. Do not use the pot in a dishwasher. Do not use for deep frying. Do not use an induction heater cover as it could cause the temperature sensor to malfunction. Dry well before use, or the remaining moisture could cause breakage when heated. Do not heat without water. The handle and lid will be hot when heated. Use mittens to hold. Do not touch or place directly on the table after using on induction heater as the heating element on the bottom surface of the pot will be very hot. Hold the pot with both hands when carrying as the ceramic pot is heavy. Do not touch with a wet cloth or put in a wet place while it is hot as rapid cooling may cause breakage. Do not heat with water filled up to the rim. If content boils over, wipe and clean the bottom surface of the pot thoroughly as the heating element may break if used unclean. Mix well and prevent food contents from burning on the bottom of the pot as the heating element may break if burning recurs. If the pot becomes burnt, boil water in the pot, add 1 tablespoon of baking soda and simmer in low heat for 2-3 minutes, let it cool down and rub with a melamine sponge. Ensure to heat with stability on the gas stove. Remove the lid when using in an oven as rapid rise in temperature may cause breakage. Do not leave the pot soaked in water. Wash with care. Do not use abrasive cleansers or steel wool. Immediately wash and dry well after use, and keep dry when not in use. Product size and shape varies in each item due to manufacturing process.

Before using:
As the pot does not absorb water, there is no need to 'seal' the pot before its first use. Lightly wash with a neutral detergent.

If you burn the pot:
After boiling water in the pot, turn down to low heat, add 1 tablespoon of baking soda, and let it simmer for 2-3 minutes. Turn off the heat, let it cool, and rub with a melamine sponge.

Do not use in the microwave. Remove the lid when using in an oven as rapid rise in temperature may cause breakage. Do not use the Lid in a dishwasher. The time it takes to boil may vary depending on the type of induction heater. Adjust heat to medium or lower when using on 200V induction heater. Ensure to heat with stability on the gas stove. Please place the pot on the center of the cooker.Do not use it on a kerosene heater.Do not heat without water. Do not pour cold liquids over it when it is heated without water. Do not put too much water. It might cause boiling over and injuries. Please use the capacity up to about 70% full as a guideline. Do not heat rapidly at high temperatures, and ensure thorough stirring while heating. The handle will be hot during and immediately after use. Use mittens to hold. When opening the lid, be careful with the steam as it may cause scalds. Do not place directly on the table while it is hot as discoloration may occur. Use a pot mat. Hold the pot with both hands when carrying.

Since enamel has a glass-like surface, please be careful not to drop, strike, or subject it to strong impacts, as these may cause cracking or chipping. Remove the lid when using in an oven as rapid rise in temperature may cause breakage. Do not touch with a wet cloth or put in a wet place while it is hot as rapid cooling may cause breakage. Do not use it if the lid knob is loose, cracked, or deformed. Do not soak wooden parts in water to prevent cracks or deformation. Immediately wash and dry well after use, and keep dry when not in use. To prevent rust, do not leave dirt containing salt or acid on the surface for a long time and do not store it in humid places.

Wash with care. Do not use abrasive cleansers or steel wool. Do not use hard metal objects to remove burnt residues. If the pot becomes burnt, boil water in the pot, add 1 tablespoon of baking soda and simmer in low heat for 2-3 minutes, let it cool down and rub with a melamine sponge. Please be careful not to cut yourself on the edge when cleaning. Depending on the manufacturing lot or characteristics of the materials, there may be variations in size, weight, and color for the same product. Due to the characteristics of the material, variations in color, partial discoloration, or black spots may occur. This is not a defect and does not affect the quality of the product.